PoolAlgaeRemover.com is supported by readers and may earn an affiliate commission.

Rather have a pro do it for you?

How to shock pool for algae

Say Goodbye to Algae: Learn How to Shock Your Pool in Just a Few Easy Steps!

Algae is a common problem in swimming pools, and if left untreated, it can quickly take over the pool and make it unsuitable for swimming. One of the most effective ways to get rid of algae is by shocking the pool. Shocking involves adding a large amount of chlorine to the pool to kill the algae and other contaminants. Here's how to shock a pool for algae:

Step 1: Test the Water
Before you shock your pool, you need to test the water to determine the current pH and chlorine levels. You can use a pool testing kit to do this. The ideal pH level for a swimming pool is between 7.2 and 7.8, and the ideal chlorine level is between 1 and 3 parts per million (ppm). If the pH or chlorine levels are too low, you'll need to adjust them before you shock the pool.

Step 2: Brush the Pool
Before you add the shock treatment, you should brush the walls and floor of the pool to remove any visible algae. This will help the shock treatment to penetrate the water more effectively and kill any remaining algae.

Step 3: Add the Shock Treatment
Follow the instructions on the shock treatment package to determine how much shock treatment you need to add to your pool. Typically, you'll need to add one pound of shock treatment for every 10,000 gallons of water in your pool. You should add the shock treatment in the evening or at night, when the sun is no longer shining on the pool.

Step 4: Circulate the Water
After you've added the shock treatment, you should run the pool pump and filter for at least 24 hours to circulate the water and distribute the shock treatment evenly throughout the pool. This will help to kill the algae and other contaminants.

Step 5: Retest the Water
After 24 hours, you should test the water again to determine the pH and chlorine levels. If the levels are still too low, you may need to add more shock treatment or other chemicals to balance the water.

Step 6: Vacuum the Pool
Once the water is balanced, you should vacuum the pool to remove any remaining dead algae and debris. This will help to keep the water clean and clear.

By following these steps, you can effectively shock your pool for algae and enjoy a clean and healthy swimming environment.

Blue Algaecide for Pools - 6 M...


Check Price
AlgaeClear Pool Treatment


Check Price
Green Algae Eliminator for Poo...


Check Price
6-Month Algaecide for 20k-30k ...


Check Price